Description

A bottom bracket that allows mounting of a crankset with a 30mm axle on a BB386evo standard frame (86x46mm).

PRODUCT	M30-THRU PF 386EVO BB - For use with Press Fit 386EVO Road frames.

MEASUREMENT	PF 386EVO = 46mm diameter / 86.5mm width Helpful frame shell guide here
BEARINGS	Steel or Ceramic Cartridge 30mm DRIVE / 30mm Non-DRIVE The ceramic version is rated Grade 5 / ABEC 5.
TOOL	⚠️This M30-specific BB is press-fitted. A press tool must be used for installation and a removal tool for removal. These are very specific tools, so contact your bike shop if you don't have them. See Instruction link.
MFG	Injection-moulded caps for this Press Fit 386EVO
AVERAGE WEIGHT	100g
⚠️NOTE	SPINDLE MEASUREMENT VERIFICATION: 103mm or more for Road \| 108mm or more for MTN OTHER BRAND CRANKS - READ AND FOLLOW YOUR CRANK INSTRUCTIONS You must read and follow the crank instructions that accompany your crank brand and model to determine the correct configuration. Praxis provides 2mm dust caps on each side as a basic configuration, but each brand has its own specific crank configuration. You may need additional spacers depending on your crank brand. Please therefore follow your brand's instructions.